Intellinet Network Solutions 503907 User Manual
Page 6
• Autoscan Period: specifies
the functions’s delay time.
• Title Bar: specifies the bar’s
position: Left, Right, Disable.
• Hotkey: specifies the hotkey
preceding sequence
(SCROLL LOCK, CAPS,
ESC, F12 or NUM LOCK).
• Password: enables/disables password protection.
• Load Default: lets you load the default settings.
• Enable Remote Console / Disable
Remote Console: toggles between
these two options. If the remote console is off (disabled), an OSD
reminder will display below the title bar.
Video Setting Menu:
• Gain: lets you specify the
gain level (00-50).
• Equ: lets you specify the
equalization level (00-50).
• To adjust the VGA setting:
Go to Main/Video Setting,
then begin to adjust Gain
and Equalization. You may
need to try several combinations before you find a preferred setting.
Status Menu:
This screen presents the unit-
specific bank number, firmware
version, KVM switch model
and the maximum number of
ports. In a daisy-chained
application, it lists details of
all banks. Press Enter to go
to the Dongle Status screen.