iLive IP908B - Manual (Page 10)

10
Playing a CD
• Besides playing Audio CDs, the unit is capable of playing AVI files and JPEG
files off of CDs.
1. Plug the unit into a standard 10V outlet, and turn the power on by moving the
Power Switch into the ON position. If the internal battery is charged, the unit
does not have to be plugged in.
. Press the Open Button and load a CD into the unit’s DVD-Drive. Close the DVD
Door, and the CD will start automatically.
3. Press the Play & Pause Buttons to play and pause the CD.
4. Press the Previous & Next Buttons to skip backwards and forwards through CD
tracks.
Programming a CD
1. Insert a CD into the unit. See the “Playing a CD” operation.
. After the CD is inserted and loaded, press the Program Button on the remote
control to display the Program Menu.
3. Use the Directional Buttons to move through the sixteen different program slots.
4. Highlight a slot and enter CD track numbers using the Number Keypad on the
remote control. Repeat steps 3 and 4 until the desired tracks are programmed.
5. Highlight the “Play” button, on screen, using the Directional Buttons, and press
the Enter Button to begin playing the programmed tracks.
PROG
PLAY CLEAR
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----