InFocus RS-232C - Manual (Page 2)

< Control LCD & PDP through Serial Port >
1. How to connect external equipment
- Connect the serial port of external equipment to the RS-232C jack of the monitor
back panel.
- RS-232C cables not included with the Monitor.
- The remote control and LCD&PDP front panel buttons (except main power) doesn’t
operate when controlling LCD&PDP set by PC.
DVI INPUT RGB PC INPUT AUDIO INPUT
Com1 Com2
RS-232C Cable
< PDP > < PC >
RS-232C
- Type of connector : D-Sub 9-Pin female to female
No conection 9
No conection 8
No conection 7
No conection 6
GND 5
No conection 4
TXD (Transmit data) 3
RXD (Receive data) 2
No conection 1
Pin Name No.
[NOTE]
* Use a crossed (reverse) cable.
- Cable Side (female) -
Harsper R&D
2005. 4. 20.