Ironman Fitness ASCENDER - Manual (Page 8)

8
Assembly
Figure 6
Locate bag labeled Figure 6. Locate brack-
et covers. Attach bracket cover to the hand-
rail assembly by lining up hole, and secur-
ing using one screw, M5*0.8-12. Repeat for
other side.
Note: Do not overtighten screw, this will
damage bracket cover.
Figure 6
Figure 7
Locate bag labeled Figure 7. Locate
Handlebars. Attach Left Handlebar to
Handlebar Assembly using three M8*16mm
Hex Bolts. Repeat for other handlebar.
Figure 7
BRACKET COVER
SCREW
LEFT HANDLEBAR
M8*16 HEX BOLT
RIGHT HANDLEBAR
CONSOLE TUBE
HANDRAIL ASSEMBLY