IBM T221 - Manual (Page 20)

14
Submenus
To access a submenu, do the following:
Brightness submenu
1. Select
the Brightness icon on the Main menu using the Left-Arrow
or the Right-Arrow button
2. Press the Menu/Enter button. The Brightness submenu appears.
3. Adjust the brightness using the Left-Arrow or the Right-Arrow
button.
4. Press the Menu/Enter button to exit from this submenu.
Video input submenu
1.
Select the Video Input icon on the Main menu using the Left-Arrow
or the Right-Arrow button.
2. Press the Menu/Enter button. The Video Input submenu appears.
OSD Screen Description
The monitor has detected a single video input signal*
The monitor has detected two video input signals*
The monitor has detected four video input signals, with timings appropriate to a four
strip mode*
The monitor has detected four video input signals, with timings appropriate to a "four
tile mode"
Numeric
(Left)
Only applicable when a single video input is used, color management is always
enabled when multiple video input signals are used.
0: Disables color management, and image smoothing is applied in low resolution
modes.
1: Enables color management. (Default)
Numeric
(Right)
When the Color management mode is enabled,
0: Initial Setting Parameters are used. (Default)
1: Parameters set by User are used for the conversion table for Color Management.
Exit from the Submenu.