Using the listening modes – Integra DTR-5.6 User Manual

Page 54

Advertising
background image

54

Using the Listening Modes

For a description of each listening mode, see “About the
Listening Modes” on page 56.

Selecting on the AV Receiver

[Stereo] button

This button selects the Stereo listening mode.

Listening Mode [

]/[

] buttons

Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.

Selecting with the Remote Controller

[Stereo] button

This button selects the Stereo listening mode.

[Surround] button

This button selects the Dolby Digital and DTS listen-
ing modes.

Listening Mode [

]/[

] buttons

Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.

[Direct] button

This button selects the Direct listening mode.

[All ST] button

This button selects the All Channel Stereo listening
mode.

Onkyo Original DSP Modes

Mono Movie

This mode is suitable for old movies and other mono
sources. The center speaker outputs the sound as it is,
while reverb is applied to the sound output by the other
speakers, giving presence to even mono material.

Orchestra

Suitable for classical or operatic music, this mode
emphasizes the surround channels in order to widen the
stereo image and simulates the natural reverberation of a
large hall.

Unplugged

Suitable for acoustic instruments, vocals, and jazz, this
mode emphasizes the front stereo image, giving the
impression of being right in front of the stage.

Studio-Mix

Suitable for rock or pop music, listening to music in this
mode creates a lively sound field with a powerful acous-
tic image, like being at a club or rock concert.

TV Logic

This mode adds realistic acoustics to TV shows pro-
duced in a TV studio, surround effects to the entire
sound, and clarity to voices.

All Ch Stereo

Ideal for background music, this mode fills the entire lis-
tening area with stereo sound from the front, surround,
and surround back speakers.

Full Mono

In this mode, all speakers output the same sound in
mono, so the sound you hear is the same regardless of
where you are within the listening room.

Selecting the Listening Modes

• The Dolby Digital and DTS listening modes

can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).

• Listening mode availability depends on the

format of the current input signal.

• While a pair of headphones is connected,

you can only select the Mono, Direct, or Ste-
reo listening mode.

Stereo

Listening Mode

,

Stereo

Direct

All ST

Surround

Advertising