Installation, Installation process – Interlink electronic 7.1 User Manual
Page 9
Advertising
RAD-Series 7.1 Getting Started Guide
Interlink Networks, Inc.
Page 5
Installation
Installation Process
The AAA Server installation process is:
1 Install software components on server machine(s).
2 Start the Server Manager program.
3 Start the Remote Control program on any machines where it is installed.
4 Access the Server Manager.
5 Add remote servers (if any) to Server Manager.
6 Start the server(s) from Server Manager.
7 Test installation using the preset configuration.
Note: This test can only be performed on the machine hosting the Server Manager program.
At the conclusion of this process, you’ll:
•
Know that the server software is installed and working properly
•
Be ready to go on to basic server configuration
Advertising