3 how to set the bus timing registers, How to set the bus timing registers – ICP DAS USA I-7540D User Manual
Page 35
Advertising
3.1.3 How to set the Bus Timing Registers
BTR0, BTR1: Set the special user-defined baud rate.
Users can set arbitrary baud with these parameters. But users need to have the
background of SJA1000 CAN controller and 82C251 CAN transceiver, and
calculate the values of BT0 and BT1 by themselves (The clock frequency of CAN
controller is 16MHz.).
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008)
35
Advertising