Software installation – IOGear GIC711SW6 User Manual
Page 7
6
7
Software Installation
Windows XP Driver Installation
1. Before installation, copy all the files under directory [CD Drive Letter]:\SATA Non-Raid_2Port\ Sil3x12\
Win98_me _2000_xp_nt4.0\driver\ *.* to a blank floppy disk.
2. After the SATA PCI Host Adapter and attached drives are configured, follow Microsoft procedures to
install Windows accordingly.
3. At the
Windows Set-up screen, press F6 in order to specify and add the driver.
4. Insert the Driver diskette. Press
S then press Enter.
5. Select
Silicon Image Sil-3x12 SATALink Controller Driver and press Enter.
6. Press
Enter to continue and follow the on-screen instructions to complete Windows XP installation.
Note: When the
Software Installation warning pops up, click Yes. And when the Hardware
Installation warning pops up, click Yes again.