IMC Networks iMcV-Switch User Manual
Page 5
2
Unmanaged Modules
The iMcV-Switch is an unmanaged 5-port 10/100 module; there are no DIP Switch
settings to configure. If installed in an unmanaged chassis, the LEDs will indicate the
status of each port.
Port LEDs
The ports on the iMcV-Switch include diagnostic LEDs that indicate unique
information about the port functionality and status.
iMcV-Switch TX/5
For all units with 5 copper ports, the two LEDs associated with each twisted pair port
are defined as follows:
Port LED
Name
Color Function
OFF
No link signal detected on copper port
GREEN
Copper port is receiving sync signal
LNK/ACT
Flash GREEN
Activity is detected on the port
OFF Port
is
operating in half duplex
TX
FDX
GREEN Port
is
operating in full duplex
Flash GREEN
Flashes when port is set to HDX and collisions occur