Icom DSC CONTROLLER DS-100 - Manual (Page 10)

CALL PROCEDURE
2
6
y Push UTC time with keypad.
• Push [ Ω ]/[ ≈ ] to move the cursor then push [ Y ]/[ Z ] to correct the
data
• Push [CLR] to Exit the menu.
• Push [A/a], then push [ENT] to enter ‘Null data’.
■ Distress call to ships
General DSC call with the ‘distress’ category may be used for
communications after the Distress call, e.g. you want to
change the operating mode, frequency, etc.
■ Individual call
q Push [CALL], then push [ √ ]
several times to select ‘Indi-
vidual call’ then push [ENT].
w Push [ √ ] several times to se-
lect the desired address,
then push [ENT].
• Enter the 9 digit ID when ‘Man-
ual entry’ is selected.
• Push [CLR] to exit the menu.
e Push [CALL] and [ENT] si-
multaneously to transmit an
Individual call.
r Push [CLR] to stop the call.
<Input an address>
ID:(9digit)
<CLR"Exit / ENT"OK>
<Select an address ID>
≈ Manual entry
DS-100 SN10
DS100 SN2
DS100 SN3
<CLR"Exit / ENT"OK>