Ingersoll-Rand ARO 6661AX-X-C - Manual (Page 4)

MATERIAL CODE
[B] = Nitrile
[C] = Carbon Steel
[E] = E.P.R.
[H] = Hytrel
[K] = P.V.D.F. (Kynar)
[N] = Neoprene
[P] = Polypropylene
[SP] = Santoprene
[SPM] = Medical Grade Santoprene
[SH] = Hard Stainless Steel
[SS] = Stainless Steel
[T] = PTFE
[U] = Polyurethane
[V] = Viton
V “Smart Parts” keep these items on hand in addition to the Service Kits for fast repair and reduction of down time.
6661AX-X-C PAGE 4 OF 8
PARTS LIST / 6661AX-X-C FLUID SECTION
FLUID SECTION SERVICE KITS
l
KITS INCLUDE: BALLS (See BALL Option, refer to -XX in chart below), DIAPHRAGMS (See DIAPHRAGM Option, refer to -XX in chart below), plus “O”
ring items (2), (3), (4), (19) and (33) (listed below) plus a 93706-1 Key-Lube grease packet (see page 6).
SEAT OPTIONS
6661XX-XXX-C
BALL OPTIONS
6661XX-XXX-C
“21” l “22”
(1-1/4” dia.)
-XXX Seat Qty [Mtl] -XXX Ball Qty [Mtl] -XXX Ball Qty [Mtl]
-2XX 95093 (4) [SS] -X1X 93278-1 (4) [N] -X8X 93278-8 (4) [U]
-3XX 94707-1 (4) [P] -X2X 93278-2 (4) [B] -XAX 92408 (4) [SS]
-4XX 94707-2 (4) [K] -X3X 93278-3 (4) [V] -XEX 93278-A (4) [SP]
-8XX 94706 (4) [SH] -X4X 93278-4 (4) [T] -XMX 93278-M (4) [SPM]
-X5X 93278-5 (4) [E]
DIAPHRAGM OPTIONS 6661XX-XXX-C
l SERVICE KIT l “7” / “8” l “3” l “4” l “19” l “33”
-XXX
-XX = (Ball)
-XX = (Diaphragm)
Diaphragm (2) [Mtl]
“O” Ring (2)
5/8” o.d. [Mtl]
“O” Ring (2)
11/16” o.d. [Mtl]
“O” Ring (4)
2-1/8” o.d. [Mtl]
“O” Ring ( x )
1-5/8” o.d. [Mtl]
-XX1 637161-X1-C 90533-1 [N] Y325-14 [B] Y325-112 [B] Y325-225 [B] Y325-220 [B]
-XX2 637161-X2-C 90533-2 [B] Y325-14 [B] Y325-112 [B] Y325-225 [B] Y325-220 [B]
-XX3 637161-X3-C 90533-3 [V] Y328-14 [T] Y328-112 [T] Y327-225 [V] Y327-220 [V]
-XX4 637161-X4-C 93459-4 / 92973-B [T/SP] Y328-14 [T] Y328-112 [T] 93282 [T] 93281 [T]
-XX5 637161-X5-C 90533-5 [E] Y328-14 [T] Y328-112 [T] 93280 [E] 93279 [E]
-XX9 637161-X9-C 90533-9 [H] Y328-14 [T] Y328-112 [T] Y327-225 [V] Y327-220 [V]
-XXB 637161-XB-C 90533-B [SP] Y328-14 [T] Y328-112 [T] 93280 [E] 93279 [E]
-XXM 637161-XM-C 90533-M [SPM] Y328-14 [T] Y328-112 [T] 93282 [T] 93281 [T]
x Quantity of eight (8) required for models 6661X3-X, 6661X4-X and 6661XP-X.
Quantity of four (4) required for models 6661XF-X, 6661XG-X, 6661XJ-X, 6661XK-X, 6661XL-X, 6661XN-X, 6661XR-X, 6661XS-X and 6661XT-X.
MANIFOLD / FLUID CAP MATERIAL OPTIONS 6661XX-XXX-C
POLYPROPYLENE P.V.D.F.
6661X3-
6661XP-
6661XF-
6661XR-
6661XJ-, XL-
6661XS-, XT-
6661X4- 6661XG- 6661XK-, XN-
Item Description (Size in inches) Qty Part No. Mtl Part No. Mtl Part No. Mtl Part No. Mtl Part No. Mtl Part No. Mtl
V 6 Diaphragm Nut
(1/2” - 20) (2) 93239-1 [P] 93239-1 [P] 93239-1 [P] 93239-2 [K] 93239-2 [K] 93239-2 [K]
15 Fluid Cap (2) 93235-[ ~ ] [P] 93235-[ ~ ] [P] 93235-[ ~ ] [P] 93235-2 [K] 93235-2 [K] 93235-2 [K]
34 Manifold, Outlet (Top) (2) 93236-[ ~ ] [P] 93236-2 [K]
35 Manifold, Foot (Bottom) (2) 93237-[ ~ ] [P] 93237-2 [K]
36 Swivel (2) 93238-[ ~ ] [P] 93238-2 [K]
V 37 Clamp (8) 93283 [SS] 93283 [SS]
38 Bolt (1/4” - 20 x 1-1/2”) (8) Y84-403-T [SS] Y84-403-T [SS]
39 Nut (1/4” - 20) (8) Y12-4-S [SS] Y12-4-S [SS]
60 Inlet Manifold (Bottom) (1) 95746-[ ~ ] [P] 95747-[ U ] [P] 95746-2 [K] 95747-[ Z ] [K]
61 Outlet Manifold (Top) (1) 95744-[ ~ ] [P] 95745-[ U ] [P] 95744-2 [K] 95745-[ Z ] [K]
U For N.P.T.F. thread colorless Polyproyplene models (6661XJ-), use “-1”. For BSP thread colorless Polyproyplene models (6661XL-), use “-3”.
For N.P.T.F. thread gray Polyproyplene models (6661XS-), use “-5”. For BSP thread gray Polyproyplene models (6661XT-), use “-6”.
Z For N.P.T.F. thread models (6661XK-), use “-2”. For BSP thread models (6661XN-), use “-4”.
~ For colorless Polyproyplene models (6661X3-, 6661XF-, 6661XJ-, 6661XL-), use “-1”. For gray Polyproyplene models (6661XP-, 6661XR-, 6661XS-, 6661XT-), use “-3”.
COMMON PARTS
ITEM DESCRIPTION (Size in inches) Qty Part No. [Mtl] ITEM DESCRIPTION (Size in inches) Qty Part No. [Mtl]
V 1 Rod
(1) 98724-1 [C]
l 2 ‘‘O” Ring
(3/32” x 3/4” o.d.) (1) Y330-113 [B]
5 Plate (2) 93441-2 [C]
24 Washer (13/32” i.d.) (8) 93360-1 [SS]
25 Bolt (3/8” - 16 x 1-1/2”) (4) Y6-67-T [SS]
26 Bolt (3/8” - 16 x 2-1/4”) (4) Y6-610-T [SS]
27 Bolt (5/16” - 18 x 4-1/2”) (4) Y6-518-T [SS]
28 Washer (5/16” i.d.) (4) 93359-1 [SS]
29 Nut (5/16” - 18) (12) 93886 [SS]