Invacare Infinity LoBack Support - Manual (Page 9)

9
PROCEDURE 2 PREPARING THE INFINITY LOBACK FOR INSTALLATION
P
R
E
P
A
R
I
N
G
T
H
E
L
O
B
A
C
K
F
O
R
I
N
S
T
A
L
L
A
T
I
O
N
FIGURE 3 - INSTALLING/REMOVING THE
MODESTY FLAP
7. Make sure the hook and loop fasteners meet by firmly
pushing the TOP of the modesty flap and the BOT-
TOM of the cushion together.
Removing
1. Grasp the modesty flap AND the fixed flap.
2. Pull UP to release the two (2) hook and loop fasten-
ers on the TOP of the modesty flap from the two (2)
hook and loop fasteners on the BOTTOM of the cush-
ion (DETAIL “B”).
2. Fold the modesty flap AND the fixed flap over the
FRONT of the cushion.
3. Grasp the two (2) folding hook and loop fasteners on
the cushion and pull UP to release them from the two
(2) hook and loop fasteners on the BACK of the back
panel (DETAIL “A”).
4. Grasp the cushion and pull it away from the back
panel to release the remaining hook and loop fasten-
ers on the cushion and back panel (DETAIL “A”).
5. Remove the cushion.
INSTALLING/REMOVING THE
MODESTY FLAP (FIGURE 3)
NOTE: Refer to the INSTALLATION AND STABILITY
WARNINGS in the SAFETY SUMMARY of this manual.
Installing
1. Align the hook and loop fasteners at the TOP of the
REAR side of modesty flap with the hook and loop
fasteners at the BOTTOM of the FRONT side of the
fixed flap (DETAIL ”A”).
2. Make sure the hook and loop fasteners meet by firmly
pushing the TOP of the modesty flap and the BOT-
TOM of the fixed flap together (DETAIL “A”).
3. Align the two (2) hook and loop fasteners at the TOP
of the FRONT side of the modesty flap with the two
(2) folding hook and loop fasteners at the BOTTOM
of the REAR side of the cushion (DETAIL “B”).
4. Make sure the hook and loop fasteners meet by firmly
pushing the TOP of the modesty flap and the BOT-
TOM of the cushion together, making sure the hook
and loop fasteners meet (DETAIL ”B”).
Removing
1. Grasp the two (2) hook and loop fasteners at the
TOP of the FRONT side of the modesty flap and pull
UP to release them from the two (2) hook and loop
fastener at the BOTTOM of the REAR side of the
cushion (DETAIL “B”).
DETAIL “A”
DETAIL “B”
Top of
Modesty
Flap
Bottom Of
Cushion
Folding Hook and
Loop Fasteners
Hook And Loop Fasteners
2. Grasp the modesty flap and pull DOWN to release
the hook and loop fasteners at the TOP of the REAR
side of the modesty flap from the hook and loop fas-
teners at the BOTTOM of the FRONT side of the
fixed flap (DETAIL “A”).
3. Remove the modesty flap.
Top of Modesty Flap
Hook and Loop
Fasteners
NOTE: The hook and loop fasteners on the front side of
the fixed flap are not shown for clarity.
Rear Side
Bottom of
Fixed Flap