Insignia NS-H4005 - Manual (Page 46)

44
Insignia NS-H4005 Home Theater System
www.insignia-products.com
Using progressive scan
The Progressive Scan option affects a TV connected to
COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the
back of your home theater system.
To use progressive scan:
1 Open the setup menu, then select Progressive Scan.
2 Press , then press or to select Off or On.
• If you connected an analog TV, select Off.
• If you connected a progressive scan TV, select On.
3 Press MEMORY/ENTER save your change.
4 Press SET UP MENU, RETURN, or PLAY to close the menu.
To reset the TV and turn off the progressive scan option:
1 Make sure that there is not a disc in the disc tray. NO DISC should
appear in the display window.
2 Press and hold STOP for five seconds. The option is turned off,
and the image reappears on the TV screen.
Caution
If the connected TV is not a progressive scan TV and you
select On, no image will appear on the screen. You need to
reset the TV to turn off the progressive scan option.
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio Off
On