Insignia NS-10PDVDD - Manual (Page 16)

14
Insignia NS-10PDVDD 10" Personal DVD Player
www.insignia-products.com
3 Plug the other end of the AV cable into the A/V jacks on the TV or
monitor. The white connector goes into the left audio jack. The red
connector goes into the right audio jack. The yellow connector
goes into the video jack.
Connecting an external input device
You can connect an external input device, such as a camcorder or
another DVD player to your player.
To connect an external input device:
1 Slide the AV IN/OUT switch to the IN position.
2 Plug the end of the supplied A/V cable that has one black
connector into the AV jack on your player.
3 Plug the other end of the AV cable into the A/V jacks on the
external input device. The white connector goes into the left audio
jack. The red connector goes into the right audio jack. The yellow
connector goes into the video jack.
Using your player
Playing a DVD or audio CD
To play a disc:
1 Make sure that your player is connected to power or that the
battery is charged.
2 Slide the ON/OFF switch on the left side of your player to the ON
position.
3 Press OPEN on the front of your player. The disc tray opens.
4 Place a disc, label side up, in the disc tray, then press CLOSE to
close the tray. The disc starts playing automatically.
Caution
Do not connect an input device when the AV IN/OUT switch
is in the OUT position.
Note
Most DVDs and your player have region codes that help
control illegal distribution of DVDs. The region code for your
player is 1. You can only play DVDs with a region code of 1
or ALL. The region code for a DVD is printed on the DVD or
the DVD packaging.
07-343_NS-10PDVDD.fm Page 14 Monday, July 9, 2007 3:40 PM