Infiniti M45 - Manual (Page 40)

38
To Operate the Voice Recognition System:
1 Press the button located on the steering wheel. The system will
respond, “Would you like to access Phone, Navigation, Information,
or Help?” and the Control Panel Display screen will change to a list of
available commands to speak.
2 After the tone, say one of the command choices. The system will
then proceed to the next step. Continue listening to the prompts
and responding with the requested information until the operation
is completed.
If you want to repeat a step or if the system incorrectly recognizes your command,
press the
button on the steering wheel or on the INFINITI Controller.
If the system does not recognize your command, repeat the command. Avoid
raising the volume of your voice or slowing down your speech.
System Operating Tips
N The interior of the vehicle should be as quiet as possible. Close the
windows to eliminate the surrounding noises.
N Wait until the tone sounds before speaking a command.
N Speak in a natural conversational voice with minimal pauses between words.
Speaking Phone Numbers
The system provides 2 commands for entering and dialing spoken phone
numbers: “Dial Number” and “International Call.” The “Dial Number”
command is used for domestic phone numbers up to 11 digits in length
(including the long-distance dialing prefix “1”). The “International Call”
command is used when more than 11 digits need to be dialed. When using
these two commands, follow the phone digit speaking rules below:
N The system will accept single digits 0 (zero) to 9.
N The long-distance dialing prefix “1” is not required when making a call.
N When saying a phone number like 800-662-6200, the system will accept
“eight-hundred” in addition to “eight zero zero” or “eight oh oh.”
N For *, #, and +, say “Star,” “Pound,” or “Plus,” respectively.