Invacare ESS-PTO - Manual (Page 42)

ABS Curved Back Assembly
NOTE: ABS curved back mounts only to Storm Series back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.
#2 Back Cushion Assembly - 16" Wide to 18" Wide
Overall
Back
Height
Material
Back
Height
16" Wide 17" Wide 18" Wide
1097377 1097376 1097375 12" 16"
1097384 1097383 1097382 13" 17"
1097391 1097390 1097389 14" 18"
1097398 1097397 1097396 15" 19"
1097405 1097404 1097403 16" 20"
1097412 1097411 1097410 17" 21"
1097419 1097418 1097417 18" 22"
1097426 1097425 1097424 19" 23"
1097433 1097432 1097431 20" 24"
NOTE: Back cover and foam are sold as a back cushion assembly only.
#2 Back Cushion Assembly - 19" Wide to 22" Wide
Overall
Back Height
Material
Back Height
19" Wide 20" Wide 21" Wide 22" Wide
1097381 1097380 1097379 1097378 12" 16"
1097388 1097387 1097386 1097385 13" 17"
1097395 1097394 1097393 1097392 14" 18"
1097402 1097401 1097400 1097399 15" 19"
1097409 1097408 1097407 1097406 16" 20"
1097416 1097415 1097414 1097413 17" 21"
1097423 1097422 1097421 1097420 18" 22"
1097430 1097429 1097428 1097427 19" 23"
1097437 1097436 1097435 1097434 20" 24"
NOTE: Back cover and foam are sold as a back cushion assembly only.
41
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-038