i. Tech Dynamic II - Manual (Page 7)

5 12
Turning On the Headset
Press and hold the MFB (Fig.1) until you hear a short beep. The status
indicator will start flashing blue.
IMPORTANT Press the MFB again each time you turn on the headset
to reactivate pairing so that the connection between the headset and
the mobile handset is resumed. For pairing, please refer to “Pairing
Your Headset” on page 6-7.
Turning Off the Headset
Press and hold the MFB (Fig. 1) until you hear a long beep. The Status
indicator will stop flashing.
IMPORTANT To disconnect the Bluetooth connection, please firstly
turn off your headset by pressing the MFB.
Turning Your Headset On and Off Built-in Battery
•
Do not attempt to replace the headset’s battery yourself as it is
built-in and is not changeable
•
Charge the battery in accordance with the instructions supplied
with this user guide.
•
Only use the manufacturer supplied charger when charging the
headset.
Charger
•
Only use the manufacturer supplied charger when charging the
headset.
•
Do not disassemble the charger as it may expose you to
dangerous voltages or other risks. Incorrect reassembly can
cause electric shock when the headset is subsequently used.
•
Do not use the charger outdoors or in damp areas.
•
Only charge the headset’s built-in battery in accordance with
the instructions in this user guide.
•
Avoid charging the headset in extremely high and low
temperatures.