Specifications – Integra ADM-2.1 User Manual
Page 8
W0008-1
E
SN 29343005
Integra Division of
ONKYO U.S.A. CORPORATION
200 Williams Drive, Ramsey, N.J. 07446, U.S.A.
Tel: 201-825-7950 Fax: 201-825-8150 E-mail: [email protected]
Integra Division of
ONKYO CORPORATION
Sales & Product Planning Div. :
2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222
Specifications
AMPLIFIER SECTION
Power Output:
100 Watts per channel min. RMS at
8 ohms, both channel driven from
20 to 20,000 Hz with no more than
0.08 % total harmonic distortion.
125 Watts per channel min. RMS at
6 ohms, both channel driven from
1 kHz with no more than 0.1 %
total harmonic distortion.
Dynamic Power Output:
2
×
140 Watts at 8 ohms
Total Harmonic Distortion:
0.08 % at rated power
IM Distortion:
0.08 % at rated power
Damping Factor:
100 at 8 ohms
Input Sensitivity and Impedance: 1 V, 50 kohms
Output Level and Impedance:
1 V, 10 kohms
Rated Speaker Impedance:
6 ohms MIN
Frequency Response:
10 Hz – 100 kHz, ±1 dB
Signal-to-Noise Ratio:
110 dB (IHF A, 0.5 V input)
GENERAL
Power Supply:
AC 120 V, 60 Hz
Power Consumption:
2.5 A
Dimensions (W
×
H
×
D):
435
Ч
145
Ч
316 mm
17-
1
/
8
"
Ч
5-
11
/
16
"
Ч
12-
7
/
16
"
Weight:
8.5 kg, 18.7 lbs.
Specifications and features are subject to change without notice.
#US_ADM-2.1_08.p65
8/25/00, 6:22 PM
8