Intel S5520SC User Manual
Page 6
• Cables (one each):
o
Front Panel Cable (baseboard header to front panel)
o
USB Cable (USB header to chassis front panel)
o
Adapter Cable providing two additional SATA power connectors
o
AC power cord is included in SC5650DPNA
• Chassis intrusion switch assembly
• Five Bumpers for installing Intel
®
Server Board S5520SC, S5500HCV, and S5500BC.
• The chassis is designed to work with Intel
®
Xeon
®
processor 5500 series with 95W maximum power, and is
compatible with boxed STS100C (Combo) or STS100A (Active) heat sink.
8)
The production Intel Server Chassis SC5650BRP SKU is compatible with the Intel
®
Server Board S5520SC,
S5500HCV, and S5500BC. It includes:
• Redundant (1+0) PMBus-compliant 600W high efficiency PFC power supply with dual line cord support (full
redundancy requires additional 600W module purchased separately)
• Three non-redundant fixed cooling fan with ducting
• Support for six tool-free non hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.
• Quick Start User’s Guide
• Cables (one each):
o
Front Panel Cable (baseboard header to front panel)
o
USB Cable (USB header to chassis front panel)
o
Adapter Cable providing two additional SATA power connectors
o
AC power cord is included in SC5650BRPNA
• Chassis intrusion switch assembly
• Five Bumpers for installing Intel
®
Server Board S5520SC, S5500HCV, and S5500BC.
• The chassis is designed to work with Intel
®
Xeon
®
processor 5500 series with 95W maximum power, and is
compatible with boxed STS100C (Combo) or STS100A (Active) heat sink.
9)
Common accessories include:
Hot Swap Drive Bays:
–
AXX6DRV3GEXP:
Expander-based 6-drive bay that supports SAS/SATA drives. Requires two free
SAS ports from the SAS personality module or SAS RAID card.
–
AXX4DRV3GEXP
: Expander-based 4-drive bay that supports SAS/SATA drives. Requires two free
SAS ports from the SAS module or SAS RAID card. Only supported in Intel
®
Server Chassis
SC5600BRP,and SC5600LX.
–
AXX6DRV3GR:
6-drive bay that supports SAS/SATA drives. Requires six free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS personality module or SAS RAID Card.
–
AXX4DRV3GR:
4-drive bay that supports SAS/SATA drives. Requires four free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS personality module or SAS RAID Card.
Only supported in Intel
®
Server Chassis SC5600BRP and SC5600LX
AXX750WPSU
: Spare 750W power supply module for Intel
®
Server Chassis SC5600LX and SC5600BRP
ARIGRACK:
Rack conversion kit (SC5600BASE, SC5600BRP and SC5600LX)
APP3RACKIT:
Rack conversion kit (SC5600 chassis family).
AXXRAKSW5:
Intel
®
RAID Activation Key AXXRAKSW5 to enable Intel Embedded RAID technology II for SAS
and/or SATA Software RAID 5 on S5520HC, S5500HCV, and S5520SC boards.
APPT600WHPSU:
Additional 600W power supply module- required for full redundancy for SC5650BRP only.
APPTHSDBKIT:
Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis
family. This kit should be used with AXX6DRV3GR
6