ICP DAS USA TDRS4050601 - Manual (Page 23)

Industrial Redundant Ring Switch – RS Series User Manual
TDRS4050601 15
DIN-Rail Mounting Installation
With ICPDAS patent DIN-Clip
®
design, DIN-Rail mounting installation becomes very easy.
Following 3 steps completes installation.
➊
Pull the down rail clip out.
➋
Obliquing the switch and insert the upper rail clips onto the upper lip of the
DIN-rail track. Then push down the switch to fit into DIN rail as shown below.
➌
Push up down rail clip to lock the switch on the DIN rail.
Up Clip
Down Clip
Push &
Clip