IMC Networks iMcV-PSE-MidSpan - Manual (Page 6)

3
DIP Switch Settings
Feature Switch Function Default
PoE ENA S1 Enables PoE functionality ON
Zero Current ENA S2 0 current LED will glow red if
no device is connected to the
PSE-MidSpan or the PD device
is not valid OFF
Classification ENA S3 Determines what amount of
power the PD device is
drawing (4W, 7W or 15W)
OFF
Auto Restart S4 Device will automatically
discover PD device should a
power failure occur
OFF
S5-S8 are OFF; Factory default, do not change