iHome IH-M132ZD - Manual (Page 3)

• Programmable buttons — these two mouse buttons can be set to perform
a variety of functions. (The software must be installed to change the
actions of the buttons.) The default actions are back and forward.
• Scroll wheel —Move the scroll wheel left or right to scroll horizontally. Roll
the wheel to scroll up and down.
• DPI button —your mouse has two sensitivity settings: standard and high-
performance. High-performance mode allows the cursor to move very
quickly and is useful for activities such as gaming. Press the DPI button to
switch modes.
• Low battery indicator —this indicator flashes when the battery needs to be
replaced.
Note: Some button functions require installation of the included software.
Connect hardware
• Remove the battery compartment cover, install 1 AA battery and replace
the battery compartment cover.
• Slide the On/Off switch on the bottom of the mouse to On. The low battery
indicator flashes for 10 seconds.
• Connect the USB nano receiver to a USB port on your computer. The
drivers for your mouse load automatically.