IBM SpotLine M110 - Manual (Page 12)

12
3.0 Usage
4.1 Configuration Setup
All the parameters of the terminal are accessible from on-screen menus,
once you have powered up the unit.
To access the menu and configuration parameters, press the following
keys simultaneously.
ALT + Esc
(Please note: If the system key has been changed to Scroll Lock, then you
must use Scroll Lock + Esc to access the setup menu)
The main menu will appear as follows:
v You can navigate around the menus with the up and down arrow keys,
then press ENTER to make a selection.
Staff V5.3dM Copyright © SpotLine, Inc. 1999, 2000
USA-0212-000003
Main Menu
User Environment
Port Configuration
Sessions
Network Configuration
Host Table
Factory Configuration
Save And Exit
Exit Without Saving
Enter: Select Arrows: Next Item F4: Toggle Color