Indesit BA35FNF P - Manual (Page 6)

6
GB
Accessories
SHELVES: with or without grill.
Due to the special guides the
shelves are removable and the
height is adjustable (see
diagram), allowing easy storage
of large containers and food.
Height can be adjusted without
complete removal of the shelf.
FLEX COOL BOX
*
: This is the new box to keep meat,
fish and cheese fresh. When positioned in the “lower” part
of the fridge compartment, it is ideal for meat and fish;
when moved to the “top” part of the fridge, it is perfect for
cheese. It can be taken out of the fridge when it is not
needed.
PLAY ZONE * : Thanks to the new “Play Zone” bottle
rack, you can cool several bottles, cans and energy drinks
quickly to have them constantly at hand.
If the “Play Zone” is placed on the glass shelf, you can
store large and medium sized bottles on it simply by
laying the bottle on the flat rack. This is ideal for storing
wine bottles. When folded and secured in place on either
side of the shelf, the rack can be used to store cans (at
the top), energy drinks (in the centre) and other cans and
energy drinks can be rested horizontally on the remaining
part of the shelf. When placing cans (onto the Play zone
rack), make sure they do not touch the back of the
refrigerator interior.
The “Play Zone” can be used just like a normal shelf
(when placed flat) and moved up or down along the fridge
walls together with the rest of the shelf. It can be washed
easily, and is also dishwasher safe. The ideal position for
the Play zone rack is the central shelf.
CAN RACK shelf: stores cans
horizontally (see diagram).
Yoghurt, butter or general
containers may also be stored
here.
1
2
ODOUR FILTER
*
: Some models
are fitted with a new odour filter
with active carbons, which
ensures better air quality inside
the refrigerator.
The filter is located on the bottom
right-hand side, inside the
ventilation opening.
ICE CARE tray
The fact that they are situated on the top part of the freezer
drawers ensures greater cleanliness: the ice no longer
comes into contact with the food placed inside the freezer
compartment; furthermore, the dripping of the water during
filling is avoided (a lid to cover up the hole after filling with
water is also provided).
1. Pull out the tray by pushing it up.
Check that the tray is ompletely empty and fill it with
water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice cubes
from dispensing (if this happens, wait for the ice to melt
and empty the tray).
3. Turn the tray 90°: due to the connected compartments
each mould fills with water (see diagram).
4. Close the opening with the lid provided and put the tray
back.
5. When the ice has formed (minimum time approximately
8 hours) knock the tray against a hard surface and wet
the outside so that the ice cubes come loose and take
them out through the opening.
WATER LEVEL
MAX
W A TER LEVEL
MAX
W
A
TER LEVEL
MAX
*
Available only on certain models.