Integra DTR-8.3 - Manual (Page 37)

37
Selecting a preset radio station
1. Press Tuner input source button on
the DTR-8.3 or Tuner button on the
remote controller.
The front display should show the currently
selected frequency.
2. Press the Preset / buttons and
select the number of the desired
preset station.
When using the remote controller:
1. Select AV Amp in the Home menu.
2. Press the Tuner button.
3. Press the CH +/– buttons and select the number of the
desired preset station.
Erasing a preset radio station
1. Press the Tuner input source (or Tuner) button and
press the Preset / buttons to select the preset radio
station that you want to erase (see above).
2. Press and hold the Memory button and then press the
FM Mode button.
The selected preset station is erased.
Listening to Radio Broadcasts
Presetting a radio station
1. Tune into the radio station you desire (see “Tuning
into a radio station” ).
2. Press the Memory button on the front
panel.
3. Using the Preset / buttons, select a
preset number (from 1 to 40) to
assign the station.
4. Press the Memory button to finalize
the procedure.
This programs the radio station as a preset radio station.
• Up to 40 stations can be stored in memory as preset radio
stations.
• You can enter text names for any of the preset radio stations
(see page 51).
ch
ch
Memory
Tuner
Preset
Preset
Memory
+
–
CH
VOL
MUTE
CONT
+
–
LIGHT
L
Memory
FM Mode
Preset
Tuner
CH +/–
Tuner
/
ch
Flashes
Lights