Impression Products MAX-300 - Manual (Page 12)

11
Using the DIR PROGRAM mode
You can use the DIR Program mode to easily add all of the tracks in a specified
directory to a sequence.
1. Press the PLAY MODE button until DIR PROG displays in the screen and the
DIR No. is flashing.
2. Using FORWARD or REWIND, select the directory you want to add.
3. Press REP/ENT to add all of the tracks in the directory to the program.
4. Repeat these steps to add up to 128 tracks.
Using the Record Feature
Your LKM012 MP3/CD Player can record up to 500 seconds of digital audio for
playback.
1. Open the disc cover and take out the disc.
2. Plug a microphone into the MIC IN jack.
3. Switch
PLAYER/RECORDER to RECORD.
Recording:
1. Press PLAY to turn on the power.
2. Press the DIR/REC button to start recording and to pause.
3. Press STOP once after recording to exit.
4. Press PLAY to play the recorded content after recording.
Note: The maximum recording time of the player is 500 seconds. Hold down the
SOUND button for 2 seconds to record in a higher quality but the maximum recording
time will be shortened to 250 seconds. After turning off the power, the recorded content
is erased. If you record a second time, the content recorded the first time will be erased.