IFB Appliances ELENA User Manual
Page 9
PROGRAMME SELECTOR KNOB
q
To select the right programme as per the
fabric being washed and extent of soilage.
q
A choice of 10 programmes is available to
wash different kinds/loads of clothes.
q
Programme selection should be done before
the machine is switched ON.
q
THE STARTING POINT OF PROGRAMME NEEDS TO BE SELECTED BY
SHIFTING THE PROGRAMME SELECTOR KNOB ADJACENT TO
PRINTED LETTERS. OPERATING THE MACHINE BEYOND PRINTING
ZONE MAY RESULT IN HIGHER CONSUMPTION OF WATER &
ELECTRICITY AND WILL NOT IMPROVE WASH QUALITY.
q
After initiating the programme, machine runs through automatically. If
for any reason you wish to change the programme switch OFF the
machine , then set the desired programme and re-start.
q
KNOB SHOULD BE TURNED ONLY IN CLOCKWISE DIRECTION.
PROGRAMME SELECTION
1. COTTONS
To be used for whites and coloureds of cotton or predominantly of cotton
in case of mixed load.
STAGE I: Main wash - Heavy wash / Normal wash / Quick wash
q
Clothes are soaked, tumbled in hot water with detergent for longer
duration to remove dirt. During draining dirty water, it is cooled down
by adding cold water. Clothes are tumbled to expose more surface,
squeezed by spinning to remove dirt inside the fabric.
q
IF CLOTHES ARE NOT VERY DIRTY, THE MAIN WASH CAN BE
STARTED BY DIRECTLY SETTING THE PROGRAMME SELECTOR
KNOB AT NORMAL OR QUICK WASH TO REDUCE WASHING TIME.
8