Infinite Peripherals ScanPro BlackBerry - Manual (Page 11)

.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc. Page 10
www.ipcprint.com
ScanPro BlackBerry OS User’s Manual v2.01
Configuring ScanPro
ScanPro Settings
The following describes the various settings in ScanPro software.
Line Feed & Carriage Return Option:
ScanPro provide option for adding a LF or CR
commands at the end of the scanned
barcode data. To enable this feature, use
the trackwheel to highlight the option to
enable then press the device space bar to
Enable or Disable the feature.
Minimize Option:
Since the primary use of the IP-BC-BT
scanner is to scan barcodes into various
applications running on the BlackBerry
device, ScanPro needs to run in the
background. The Minimize option is used to
place ScanPro in the background to you can
work within other applications.
Exit Option:
To stop ScanPro from reconnecting with the
IP-BC-BT scanner when not in use, use the
Exit option to terminate the ScanPro
application.