iRiver iFP-300 Series - Manual (Page 31)

FAST SKIP
OFF : Skip doesn’t activate.
10 : Skip 10 tracks at time.
DIRECTORY : Skip to previous or next folder.
This defines the operating method of short or
long click of
or lever.
STOP POWER OFF
: Automatically turns power off at stop
mode. (Time range can be set from 1 to 60
minutes by a minute)
Use the or button to adjust time.
SLEEP POWER OFF
: Automatically turns power off after a fixed
time. (Time range can be set from 0 to
180 minutes by a minute)
Use the or button to adjust time.
Set BEEPON/ OFF by pressing the NAVI/MENU button.
When the power is off, the sleep power off setting goes back to Zero setting.
BEEP
TIMER (SET AUTO POWER OFF)
CONTROL
FF/RW SCAN SPEED
The fast scan speed can range from 1x/2x/
4x/6x.
recording quality
VOICE RECORDING MODE
You can adjust recording quality when
recording Voice.
Bit Rate : 8Kbps~160Kbps
Sampling Frequency : 11.025KHz ~44.1KHz
VOICE RECORDING MODE
32KHz
32KBPS
AGC ON AGC OFF
EQ LIMIT
ON : Limit the control of equalizer frequency
to prevent distortion of sound.
OFF : You can enjoy original sound though
distortion of sound may occur.
ON : When recording voice, the recording level is automatically controlled and the
sound from a long distance is normally recorded.
OFF: AGC Control not activated.
SOUND BALANCE
Balance your sound to the right or left or keep it in
the center according to your preference. When
Sound Balance bar is moved to L (Left, 0),the sound
outputs at the left earphone. When the lever is
moved to R (Right, 40) the sound outputs at the right
earphone. The default value is 20 and the sound
outputs the same level at both earphones.
58 59