IBM MICRO TOWER 2169 - Manual (Page 55)

53
This item lets you disable the built-in parallel port, or enable it
by assigning an I/O address and an Interrupt Request Line
(IRQ).
Parallel Port Mode Default: ECP
ECP Mode Use DMA Default: 3
This item defines the operation of the parallel port. If you are
connected to a parallel device that supports the higher-
performance EPP (enhanced parallel port) or the ECP
(extended capabilities port) make the appropriate changes to
this item.
PWRON After PWR-Fail Default: Off
If this item is enabled, the system will automatically resume
when power is restored after an interruption in the power
supply.
Game Port Address Default: 201
This item lets you disable the built-in game port, or enable it by
assigning an I/O address.
Midi Port Address Default:330
Midi Port IRQ Default: 10
This item lets you disable the built-in MIDI port, or enable it by
assigning an I/O address. If you enable the MIDI port, use the
following item Midi Port IRQ to assign an Interrupt Request line
to the port.