IBM G94 - Manual (Page 15)

The monitor controls are accessed by pressing button to enable OSD (On-Screen-Display). The main menu will be
displayed as follows.
On-Screen-Display
Activating the On-Screen-Display
Each Sub-Menu is selected by highlighting it via the rotary control ( ) and pressing button ( ) to select. Each item from the
sub-menu can then be selected in the same way. To exit OSD, highlight EXIT at the center of the main menu and press select
button (
).
If the OSD is not used for more than 10 seconds (delay can be set by user), the current setup will be saved and the OSD will
disappear automatically.
A I N C M
ma i n r e e n s c
e t r y g e om o l o r c
n c e d a d v a c i a l s p e
ONT RO L S
1 2 0 0 1 6 0 0 x 9 3 . 8 K / 7 5HZ
RESET
EXIT
8