Troubleshooting – iHome IPOD ID37 User Manual

Page 10

Advertising
background image

iD37 does not turn on

AC adaptor isn't plugged into a working wall
socket or not plugged into the power supply
jack on back of the unit

Plug the AC adaptor into a working wall socket and plug the
connector into the supply jack on the unit

iD37 requires a reset

If unit is plugged in and doesn't respond, try resetting the unit by

following these steps:

a) remove iPhone/iPad/iPod from dock
b) unplug unit from power source
c) remove back up batteries
d) wait a few minutes, then resume use

iPhone/iPad/iPod is not docked properly

Remove your iPhone/iPad/iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPhone/iPad/iPod. Then reseat it in the dock.

Battery Low icon
always flashing

Batteries are weak

Replace with new batteries

Batteries were not installed properly

Check to make sure the polarity ( + and – ends) matches the
diagram in the battery compartment

iPhone/iPad/iPod
does not respond to
the unit

iPhone/iPad/iPod is not docked properly

Remove your iPhone/iPad/iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPhone/iPad/iPod. Then reseat it in the dock.

Your iPhone/iPad/iPod software is too old

Upgrade software on your iPhone/iPad/iPod via iTunes on your
computer

iPhone/iPad/iPod is locked up/plays but no
sound comes out

Check the volume setting. Make sure your iPhone/iPad/iPod is working
properly before docking into the unit. Please refer to your
iPhone/iPad/iPod manual for details. See above for software upgrade
information. You may need to reset your iPhone/iPad/iPod. Refer to
your iPhone or iPod user guide for details on how to perform a reset.

Using 1

st

or 2

nd

generation iPod, iPod

shuffle or other devices.

iD37 cannot control those iPod models or other devices.

iPhone/iPad/iPod
didn’t charge up

iPhone/iPad/iPod is not docked properly

Remove your iPhone/iPad/iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPhone/iPad/iPod. Then reseat it in the dock.

iPhone/iPad/iPod is locked up/ frozen

iPhone/iPad/iPod battery has problem

Please make sure your iPhone/iPad/iPod is working properly
before docking into the unit. Please refer to your iPhone/iPad/iPod
manual for details.

8

Troubleshooting

Solution

Symptom

Possible Problem

No sound from iD37

Volume is set too low on iD37

Make sure volume is turned up

Move unit away from potential sources of external interference such
as computers, modems, wireless devices (routers) or fluorescent
light.

iD37/iPhone/iPad/
iPod performance is
erratic

The iD37 is reacting to external interference

iD37 doesn’t respond

Advertising