Iluv IMM9400 - Manual (Page 9)

iLuv | 16 iMM9400/9500 | V10M10_IM_EN_060509 15 | iLuv
OPERATIONAL INSTRUCTIONS
Basic Operation with iPhone or iPod
OPERATIONAL INSTRUCTIONS
Installing the dock adapter
Before docking your iPhone or iPod on iMM9400/9500, a dock adapter must be properly installed. Please
make sure you are using a correct dock adapter for your iPhone or iPod and that it is properly inserted
into the universal adapter of iMM9400/9500. Failure to do so may damage your iPhone or iPod.
Playing your iPhone or iPod
1. Carefully dock your iPhone or iPod.
2. Press to turn on the unit. Repeatedly press MODE until
“iPod” shows on the display. If not in already in iPod mode,
press to begin playback of your iPhone or iPod .
3. Press the or to select desired track.
4. Press and hold the or to search track.
Pause
To briefly interrupt playback, press .
1. Press again to restart play.
2. To end the iPod playback, select another mode,
or press to turn OFF the unit.
Repeat
Press while your iPhone/iPod music is playing.
1. Press once during iPhone/iPod music is playing. Current track will repeat.
2. Press twice during iPhone/iPod music is playing. All tracks will repeat.
Shuffle
Press while your iPhone/iPod music is playing.
· Press while iPhone/iPod music is playing. iPod will start random playing. Press again to change
normal playing mode.
Charging your iPhone or iPod
To charge your iPhone or iPod, insert your iPhone or iPod into the built-in universal dock. Ensure that
iMM9400/9500 is connected to an outlet.
Amplifier and Radio Operation
1.
Switching the unit ON
Press to turn on the system.
Selecting the mode
The different operating modes can be directly selected by repeatedly pressing MODE on the top panel or
iPod, SD Card, USB, CD, AUX or AM/FM on the remote control.
Adjusting the volume
To adjust the volume, press VOLUME +/-.
To turn the sound off, press MUTE. This function is indicated
when the word, appears in the display.
By pressing MUTE or VOLUME +/- again, the sound will
turn back on.
Dimmer control
1. Press DIMMER to adjust the brightness of LCD backlight.
2. There are three steps including “Off,” “ Low “ , “ High “
Headphone jack
The headphone jack is for headphones equipped with a 3.5mm jack. Use an adapter (sold separately) if
your headphone has a different plug. The speakers are automatically switched off when the headphones
are being used.
AM/FM radio operation
1. Turn the unit on by pressing .
2. Switch to the Tuner operating mode by pressing AM/FM.
Manual station selection
1. Press AM/FM to switch between AM and FM.
2. Press or to tune to the desired radio station.