Impex ME-708 User Manual
Marcy, Me-708, Magnetic-resistance upright bike
Advertising
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 5
- EXPLODED DIAGRAM………………………………………………………………. 11
- PARTS LIST...................................................................................................… 12 COMPUTER................................................................................................…… 13
- WARRANTY.................................................................................................…. 16
- ORDERING PARTS.....................................................................................….. 16
- ASSEMBLY INSTRUCTION
- A.) Attach the Handle (#5) to the Front Post (#4). Secure it with two M8 x 1 1/8” Screws (#26).
- B.) Connect Upper Computer Wire (#28) to the Middle Computer Wire (#21).
- C.) Insert the Computer (#6) into the opening on Front Post.
- A.) Remove the three Ø 5/8” Washers (#12), three Ø 3/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14) from the Seat (#8).
- B.) Attach the Seat to the Seat Post (#7). Secure it with three Ø 5/8” Washers (#12), three Ø 3/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14).
- C.) Insert the Seat Post into the opening on Main Frame (#1). Thread the Lock Knob (#11) through the hole on Seat Post to securely lock it at desired height.
- EXPLODED DIAGRAM
- MUSCLE TONING
- WEIGHT LOSS