IBM 8317 User Manual
Page 72
POST Error Code
FRU/Action
1802
PCI/PnP Error! Not Enough I/O Space
Available
1.
Run Setup and verify PCI/ISA
configuration settings.
2.
If necessary, set ISA adapters to Not
available to allow PCI adapters to
properly configure.
3.
Remove any suspect ISA adapters.
4.
Rerun diagnostics.
5.
PCI Adapter
1803
PCI/PnP Error! Not Enough Memory
Space Available
1.
Run Setup and verify PCI/ISA
configuration settings.
2.
If necessary, set ISA adapters to Not
available to allow PCI adapters to
properly configure.
3.
Remove any suspect ISA adapters.
4.
Rerun diagnostics.
5.
PCI Adapter
1804
PCI/PnP Error! Not Enough Real
Memory Space Available
1.
Run Setup and verify PCI/ISA
configuration settings.
2.
If necessary, set ISA adapters to Not
available to allow PCI adapters to
properly configure.
3.
Remove any suspect ISA adapters.
4.
Rerun diagnostics.
5.
PCI Adapter
1805
PCI/PnP Error! Adapter ROM
Checksum Error
1.
Run Setup and verify PCI/ISA
configuration settings.
2.
If necessary, set ISA adapters to Not
available to allow PCI adapters to
properly configure.
3.
Remove any suspect ISA adapters.
4.
Rerun diagnostics.
5.
PCI Adapter
180X, 188X
PCI configuration or resource error
1.
Run Setup and verify PCI/ISA
configuration settings.
2.
If necessary, set ISA adapters to Not
available to allow PCI adapters to
properly configure.
3.
Remove any suspect ISA adapters.
4.
Rerun diagnostics.
5.
PCI Adapter
1962
No operating system found
1.
Press F1 to repeat boot sequence.
209X
1.
Diskette Drive
2.
Diskette Cable
20XX
Not listed above
1.
BSC Adapter
66
Hardware Maintenance Manual