IBM 22P6979 - Manual (Page 13)

Handling Instructions
To protect your CD-RW drive during installation, observe the following
precautions:
v Handle the drive with care. Dropping or jarring the drive can damage the
components inside the drive housing.
v Keep the CD-RW drive in its antistatic bag until you are ready to install the
drive in your computer. Limit your movement. Movement can cause static
electricity buildup.
v Do not force insertion of the power cable. Doing so might damage the connector
or the drive.
Product views
The following sections illustrate the front and back views of the CD-RW drive.
Front view of the drive
Refer to the following illustration to identify parts that might be referred to in the
installation instructions.
ReWriteable H iS
p e e d
Note: Front bezel design might be different (varies by supplier).
1 Busy indicator: This light comes on when the drive reads from, writes to, or
plays a CD.
2 CD tray: Use this tray to load and unload a CD.
3 Manual-eject hole: This hole provides access to the eject mechanism to remove
a CD from the drive when normal ejection procedures do not work.
4 Eject/Load button: When pushed, this button opens or closes the CD tray.
Back view of the drive
Refer to the following illustration to identify parts that might be referred to in the
installation instructions.
1 Reserved
2 Audio-out connector: Use this connector to attach the CD-RW drive to a sound
adapter.
3 Configuration pins: These pins are used to set the drive configuration.
Installation and user’s guide 3