Impex H2502C - Manual (Page 8)

STEP 2
A.) Insert the Handle Post (#6) into the front opening on Main Frame (#1). Use the Lock Knob (#11) to
hold the Handle Post at selected height.
B.) Attach the Handle (#7) to the Handle. Secure them together with four M8 x 5/8” Allen Bolts (#9),
four Ø 5/8” Lock Washers (#20), and four Ø 5/8” Flat Washers (#19).
C.) Insert the Seat Post (#4) into the opening on Main Frame. Use the Lock Knob (#11) to hold the
Seat Post at selected height.
D.) Flip over the Seat Pad (#12). Insert the tube of the Seat Support into the open slot and securely
fasten the two nuts to secure the Seat Pad to the tube.
E.) Insert the Seat Support (#5) through the open slot on Seat Post. Use the Lock Knob (#11) to hold
the Seat at selected position.
© IMPEX INC. 7