IOGear GWU513 - Manual (Page 12)

c) Insert the supplied Setup CD into your
CD-ROM drive, and the Setup Wizard will
run automatically. If it does not, please
manually execute Index.htm.
d) From the prompted startup window,
choose Install Driver to begin the
installation.
It’s free and easy for you to install your
Wireless-G USB 2.0 Flex Adaptor and the
attached software – Wireless-G Configura-
tion Tool. Simply with a few clicks of the
mouse, you will succeed the completion of
installation.
To have the Wireless-G USB 2.0 Flex Adaptor
operated appropriately, please read and go
along with the instructions below carefully.
Here we take Windows XP as an example.
a) Plug your Wireless-G USB 2.0 Flex Adaptor
into a USB 2.0 port on your PC.
b) Your system will detect the device, and the
Found New Hardware Wizard dialog box
will appear. Choose Cancel to proceed.
Installation
Installation Procedures
10