Impex PHE 2000 User Manual
Powerhouse elite, Phe 2000, Model phe 2000
Advertising
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................... 1
- IMPORTANT SAFETY NOTICES..................................................................... 2
- HARDWARE PACK……….....…....................................................................... 3
- ASSEMBLY INSTRUCTIONS........................................................................... 6
- WEIGHT RESISTANCE CHART........................................................................24
- PARTS LIST………………………………………………………………………….. 25
- WARRANTY.................................................................................................… 26
- ORDERING PARTS......................................................................................... 26
- HARDWARE PACK
- HARDWARE PACK
- ASSEMBLY INSTRUCTION
- Attach the Butterfly Base (#14) to the Vertical Frame (#5). Secure it with one 4 ¾” x 2” Bracket (#26), two M10 x 3 ½” Carriage Bolts (#71), two ( ¾” Washers (#87), and two M10 Aircraft Nuts (#89).
- Insert the Right Butterfly (#20) into the right pivot on Butterfly Base. Secure it with one M10 x ¾” Allen Bolt (#76) and (1 3/8” Washer (#66) from the bottom.
- Insert the Butterfly Handle (#13) into the pivot on the Right Butterfly. Secure it with one M10 x ¾” Allen Bolt (#76) and ( 1 3/8” Washer (#66).
- Repeat Procedures B and C above to install the other side.
- DIAGRAM 6
- Station
- Leg Developer
- Station
- Leg Developer