iHome IA100 - Manual (Page 10)

Listening to Radio
7
Listening to iPad, iPhone or iPod
Setting up the Antenna
1. Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1. Press the Mode Button until the current FM radio frequency appears in the display.
2. Press the  or  Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the
next clear station.
3. To memorize a station as a preset:
A. Press the Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then
hold the Button until the selected preset number begins flashing in the display.
B. Press the  or  Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for
the next clear station.
C. Press the Button to confirm the setting, a confirmation beep will confirm the setting and the preset number you
wish to assign. Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset stations, use the Mode Button to select FM mode, then press the Button to choose the desired
preset.
5. Press the or Button on the iA100 to adjust the system volume.
TIP: Download the iHome+Radio app from the App Store to enjoy thousands of internet radio stations from around the
globe on your iA100.
1. Dock an already playing iPad, iPhone or iPod. The iA100 will automatically turn on and you will hear the audio playing
from your iPad/iPhone/iPod.
Note: If the audio source volume is too low on the iPad/iPhone/iPod, the iA100 may not detect that the iPad/iPhone/iPod
is in play mode. If so, pressing the Button on the main unit once should make it play.
2. When the iPad/iPhone/iPod is docked and in standby mode, press the Button on the iA100 to play the
iPad/iPhone/iPod. If the iA100 is already on, press the Mode Button until “iPod” appears on the lower part of the
display, indicating the iA100 is in iPod mode. If your iPad, iPhone or iPod touch is in video mode, you may see the
“locked” slider on the iPad/iPhone/iPod display. If so, you will need to unlock your iPad/iPhone/iPod.
3. Press the Button on the iA100 to pause play; press again to resume play.
4. Press  or  Button on the iA100 to go to the next or previous track. Press and hold while track is playing for high
speed forward or reverse music search of the current track.
Adjusting Sound on the iA100
You can adjust the sound on the iA100 while listening to any sound source.
1. Press the or Button on the iA100 to adjust the system volume. For best sound, press and hold the EQ Button
located on the back of the unit and press again as needed to cycle to treble, bass and mid (range) sound options, then
press  or  Button to adjust each option. The Bongiovi DPS sound enhancement circuitry is ON by default. Press
the Button to toggle the circuit on and off.
TIP: You can also adjust EQ and Bongiovi effect with the iHome+Sleep app.