IBM CI5VGM Series - Manual (Page 100)

Chapter 5 VGA Driver Installation Guide
96 CI5VGM User’s Manual
Installing Trident 9520/25 Drivers for Windows NT 4.0
IMPORTANT: You should install the Windows NT 4.0 Service Pack 3
first before installing the Trident 9520/25 VGA drivers. If you don't have
the Windows NT 4.0 Service Pack 3, please contact your software vendor
or download it from Microsoft's web site.
Step 1. Boot Windows NT 4.0.
Step 2. Double click the
My Computer icon.
Step 3. Double click the Control Panel icon.
Step 4. Double click the Display icon.
Step 5. Click Change Display Type .
Step 6. Click Change .
Step 7. Click Have Disk , then insert the diskette disk labeled Trident
9520/25 VGA Driver Windows NT4.0 or CD containing the
Trident 9520/25 VGA Windows NT 4.0 drivers to the floppy disk
drive/CD-ROM drive, then type in A:\ (if you are using drive A) or
type in D:\VGA\Trid9520\WINNT40 (if you are using drive D
which is your CD-ROM drive), and press Enter .
Step 8. Select Trident Video Accelerator 3D Adapter [TW3001] , then
click OK .
Step 9. Click Yes to copy the drivers from the floppy disk/CD to the hard
disk.
Step 10. When copying is done, click OK .
Step 11. Click Close .
Step 12. Click OK .
Step 13. Windows NT 4.0 will prompt you to restart computer. Click OK
to change the Windows NT configuration.