Icom IC-M32 User Manual
Page 27
21
7
SET MODE
New2001
7
D Self check function “SC”
The self check function checks transceiver conditions by it-
self, and informs you in case a problem is found. The follow-
ing items are checked after the power is turned ON, then it
switches to operation mode.
• Temperature : Outside of –25°C to +65°C; –13°F to +149°F
(approx.)
• Connected battery voltage
• Water intrusion
When error messages as shown below are displayed, see
troubleshooting for advice. (p. 29)
D Battery voltage indicator “bt”
The voltage of the connected battery pack can be turned ON
(displayed for 2 sec.) or OFF (non-displayed) after power is
turned ON.
Battery voltage
indication OFF
(default)
Push
Battery voltage
indication ON
Temperature error
Battery voltage error
Water intrusion error
Push
Self check OFF (default)
Self check ON
IC-M32-1.qxd 03.9.25 6:21 PM Page 21 (1,1)