IBM Partner Pavilion 1464 - Manual (Page 27)

27
Load paper
5 Place the paper against the back left corner of the tray, print side down.
Do not load bent or wrinkled paper.
Note: Do not exceed the maximum
stack height indicated on the front guide.
Overfilling the tray may cause jams.
6 Squeeze the front guide lever and slide the guide until it firmly touches the stack
of paper.
7 Reinstall the tray.
Make sure the tray is pushed completely into the printer.
Loading the 2000-sheet
tray
Follow these instructions to load a 2000-sheet tray. Do not load any print media other
than paper in the 2000-sheet tray. See the table on page 26 for paper type and size
information.
1 Pull open the tray.
2 Squeeze the side guide lever, lift the guide, and place it into the appropriate slot
for the size paper you are loading.
Maximum
height guide