Step7: load paper, Loading the 500sheet trays, Step 7: load paper – IBM Partner Pavilion 1464 User Manual

Page 26: Loading the 500-sheet trays, Load paper

Advertising
background image

26

Load paper

Step 7: Load paper

Note:

When loading specialty media

such as transparencies or card stock,
refer to the User’s Guide on the
publications CD.

The following table lists page numbers where you can find loading instructions for the
standard and optional trays, as well as for the multipurpose feeder.

Loading the 500-sheet
trays

Follow these instructions to load any of the 500-sheet trays.

Warning:

Never remove paper trays

while a print job is printing. It could
damage the tray or the printer.

1

Remove the tray from the printer and place it on a flat, level surface.

2

Squeeze the front guide lever and slide the guide to the front of the tray.

3

Squeeze the side guide lever and slide the guide to the correct position for the
size paper you are loading.

Icons along the back of the tray indicate paper sizes.

4

Flex the sheets back and forth to loosen them, and then fan them.

Do not fold or crease the paper. Straighten the edges of the stack on a level
surface.

Source

Paper sizes supported

Paper types supported

Capacity

Go to page...

500-sheet trays

Letter, A4, A5, Legal,
Executive, JIS B5, Folio

a

,

Statement

a

, Universal

b,c

Paper, transparencies,
labels, card stock

500 sheets of 20 lb paper

e

350 transparencies

e

200 sheets of labels or card stock

d,e

26

2000-sheet tray Letter, A4, A5, Legal,

Executive, JIS B5

Paper

2000 sheets of 20 lb paper

e

27

Multipurpose
feeder

Letter, A4, A5, Legal,
Executive, JIS B5, Folio,
Statement, Universal

b,c

Paper, transparencies,
labels, card stock

100 sheets of 20 lb paper

e

75 transparencies

e

40 sheets of labels or card stock

d,e

29

7¾, 9, 10, DL, C5, B5, other

f

Envelopes

10 envelopes

a

Supported as selected paper with tray size sensing turned off in the appropriate trays.

b

When selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless otherwise specified.

c

Load narrow media with the length in the feed direction (portrait).

d

If you print large quantities of labels or other glossy specialty media, you should purchase a web oiler field upgrade kit. Contact the

place where you bought your printer for more information.

e

Capacity varies with media weight and construction. Refer to the User’s Guide for more information.

f

Size can vary from 98.4 x 62 mm to 176 x 250 mm (3.87 x 6.38 in. to 6.93 x 9.84 in.).

Advertising
This manual is related to the following products: