Insignia NS-P42Q10A - Manual (Page 8)

4
www.insigniaproducts.com
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-P42Q-10A,
NS-P501Q-10A, or NS-P502Q-10A represents the
state of the art in plasma TV design and is designed
for reliable and trouble-free performance.
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the base to the stand with the four
included screws.
Securing your TV to a wall or cabinet
To secure your TV to a wall or cabinet:
1 Attach the anti-fall device to the back of your TV
with the provided M4×16 screw.
2 Mount a screw (not provided) to the wall or
cabinet where your TV will be set. Leave the
screw head protruding 1/4" (6.35 mm).
Warnings
• Your TV screen is heavy. You should use two
people to lift the screen and hold it in place.
• Make sure that you install the base securely
before moving it. The stand could fall and cause
serious injury.
• Always store your TV upright.
Warnings
• Pushing, pulling, or climbing on your TV can
cause it to fall resulting in serious injury or
damage to your TV.
• For added stability, secure your TV to the wall
with the anti-fall device.
• If you do not think you can install the anti-fall
device, contact a professional installer.
• Be sure to use a wall anchor to secure the screw
into dry wall, if necessary.
Wall
Cabinet
NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 4 Friday, March 20, 2009 3:11 PM