Insignia NS-DCC5HB09 - Manual (Page 29)

27
Insignia NS-DCC5HB09 5 MP High Definition Digital Camcorder with 3.0" LCD Monitor
www.insigniaproducts.com
Selecting the on-screen menu language
To select the on-screen menu language:
1 In record mode, press OK to open the record
menu.
2 Press or to select Setting. The Setting
menu opens.
3 Press T (up) or W (down) to select
Language. The Language menu opens.
4 Press T (up) or W (down) to select a
language, then press OK to save your
selection and close the menu.
Restoring default settings
To restore default settings:
1 In record mode, press OK to open the record
menu.
2 Press or to select Setting. The Setting
menu opens.
3 Press T (up) or W (down) to select Default
Setting. The Default Setting menu opens.
4 Press T (up) or W (down) to select Yes. If
you want to cancel the restoration, select No.
5 Press OK to restore settings and close the
menu.
Transferring files to a PC
The PC you connect your camcorder to must
meet the following requirements:
• Windows Vista
®
, Windows
®
XP, Windows
®
2000, Windows
®
Me, or Windows
®
98SE
operating system
• Pentium
®
III processor with 800 MHz or
above
• 256 MB of memory
• CD drive
• 1 GB free hard drive space
• Available USB 2.0 port
To transfer files to a PC:
1 Connect the mini-USB cable to the USB port
on your camcorder, then connect the other
end to a USB port on a PC. The red LED
lights when your camcorder is connected to
the PC, and your camcorder is in Mass
Storage mode.
2 Open My Computer, then double-click
Removable Disk\DCIM. The files on your
camcorder are displayed. From My
Computer, you can read, delete, move, and
copy any movies, pictures, or voice
recordings on your camcorder.
Maintaining
• Avoid pressing hard on the camcorder body.
• Do not subject the LCD to impact because
the glass may break and fluid may leak from
your camcorder.
• When you store your camcorder for an
extended period or you are not going to use it
soon, remove the batteries. Leakage may
occur that will damage your camcorder.