Intel Peavey ReValver MK III - Manual (Page 23)

Stomp boxes / pedals
A module from this category is usually placed before an amp module. They are designed to shape
the sound before it is colored by the amp.
Module name = OverDriver
Description = This stomp box is wired somewhat like a Guitar amp, in that it uses 3 stages of diode
distortion. The “Turbo” acts like a “Master,” adding some extra gain before the last stage. This
stomp box could be used to drive a speaker by itself.
Module name = Chorus CS-1
Description = This is a versatile stereo chorus with adjustable speed and modulation depth, ste reo
width, feedback, delay and 3 individually adjustable filter bands on the wet signal. A chorus can
be used to enrich the sound.
Module name = ACS-CS1 compressor
Description = This compressor is used to even out the volume so that the lower levels do not
com pletely disappear, making the soft sounds louder and the loud sounds softer and adding a
certain sustain.
Module name = ACS-LM3 limiter
Description = A limiter is a specially tailored dynamics compressor. This particular limiter com-
presses the sound a factor 50:1 over the given threshold. It will stop sounds or transients over this
threshold, limiting the output volume.
22