InFocus IN42ff User Manual
Page 32
31
Custom Key
(for use with optional remote only): allows you to assign a dif-
ferent function to the Custom key on the optional remote to quickly and
easily use the effect. Only one effect can be enabled at a time. The default is
Source Info; highlight an effect and press Select to choose a different one.
Blank
: shows an empty screen.
Mute
: turns off all sound.
Aspect Ratio:
sets the ratio of the image width to image height.
Source:
cycles through the available sources.
Auto Image:
causes computer sources to be reacquired.
Freeze:
pauses the projected image.
Magnify
: allows you to enlarge a section of the projected image.
Source Info
: displays the Source Info menu.
Service Info
: displays the Service Info menu.
Network:
The projector has an RJ45 Ethernet connector that supports net-
work connections and TCP/IP protocols. This will allow for the control and
management of the projector over a corporate network. Visit our website for
complete details on using the networking functionality. The following fields
are accessible when DHCP is not checked and available for manual entry of
data.
IP Address:
Identifies the projector on the network.
Subnet Mask:
Separates the network address part of the IP address.
Default Gateway:
The IP address of the local router.
DHCP:
Select this to automatically obtain an IP address, Subnet mask,
and Default gateway.
Network Info:
Provides information on the network configuration.
The Network Info menu is informational and cannot be edited. It displays
the current IP Address, Subnet Mask, Default Gateway, and the projector’s
MAC Address.
Custom Key
Network
Network
Info
EDX Ref Guide.fm Page 31 Friday, June 30, 2006 10:48 AM