Invacare TDX SP - Manual (Page 41)

SECTION 5—WHEELCHAIR OPERATION
Part No 1143190 41 TDX™ SP
Splash Screen
NOTE: For this procedure, refer to
FIGURE 5.5.
This screen is displayed at startup of the
joystick for about 2 seconds. This screen
displays the software version and date
information.
After this screen, the joystick displays the
Main Screen.
FIGURE 5.5 LCD Display Screens - Splash
Screen
Main Screen
NOTE: For this information, refer to FIGURE 5.6 on page 42.
During normal operation, the active drive is displayed in the upper half of the LCD
display. Battery charge level is shown in the Battery Gauge Display (BGD) located on the
right side of the LCD display. At full charge, solid blocks fill in all ten segments between
E (Empty) and F (Full). As the battery becomes discharged, the top most segments will
progressively disappear until no segments appear between E and F. At this level, the user
should charge the batteries as soon as possible.
The lower half of the LCD display is the Information Center. The Information Center
displays current data on the wheelchair.
Refer to LCD Display table on page 41 for descriptions of information shown.
LCD DISPLAY
ITEM DESCRIPTION
DRIVE NAME This field shows the currently selected Drive’s Name.
Available choices are as follows:
Drive 1*
Drive 2*
Drive 3*
Drive 4*
“No Drive” selected via the programmer.
*NOTE: Drive names can be customized. Actual drive names may display differently.
BATTERY LEVEL
INDICATOR This symbol shows the Battery Level and will change depending on the available
battery power.
This indicator is shown on every screen.
STATUS MESSAGE This area displays status or instructions.